4–Position Float
This feature provides four handle positions, of which three are standard Double-Acting with spring centering to neutral. The fourth position has a detent to hold in “Float” position allowing the cylinder or motor to travel back and forth at will. When the spool is in this “Float” position, both cylinder ports and pump ports are open to tank. Kit No. 1V1600 (Spool Not Included) (Not for field conversion, Replacement Kit only)
3–Position Detent
This feature provides three handle positions, all of which are held with a detent, and has no spring centering to neutral. This option allows control and directing of flow to stop, start or reverse hydraulic motors. It can be used to divert flow to one or more separate circuits.
NOTE: Parts not listed are standard, See BA 3 Spool.
Spring Extended Spool
Spring Retracted Spool
Detent With Spring Centering
This feature allows spring centering to neutral with a detent for the “IN”, “OUT” position, or both the “IN” and “OUT” position. The one or two position detent with spring centering is desirable for the operation of hydraulic cylinders or motors. The one position detent provides a float position for a three-Way spool in the “IN” or DUMP position. This detent feature is applicable where quick release and centering is needed or for good metering of flow before placing into detent.
NOTE: Parts not listed are standard, See BA 3 Spool.
Pressure Detent – Kit #1V0642
“BA” valves with Three-Position spools can be provided with this option on any or all spools. A Pressure detent holds the spool in the “IN” position, “OUT” position or both “IN” and “OUT” positions. The detent is held until the cylinder or motor reaches a pre-set pressure, releasing the detent, allowing the spool to spring return to neutral. Field installation can be made only if valve already has this option.
| Reference Number | Part Number | Description | Quantity |
|---|---|---|---|
| Reference Number | Part Number | Description | Quantity |
| 1 | 1V0094 | Float Spool | 1 |
| 2 | 1V0205 | Float Detent Sleeve | 1 |
| 3 | 1V0260 | Float Detent Retainer | 1 |
| 4 | 1A0294P | End Cap | 1 |
| 5 | 1A0710 | Retainer Plate | 1 |
| 6 | 1A0737 | Float Stop Washer | 1 |
| 7 | 1A0738 | Float Stop Collar | 1 |
| 8 | 1A0739 | Detent Spring | 2 |
| 9 | 1A0764 | Float Spacer | 1 |
| 10 | 1A9231 | Float Centering Spring | 1 |
| 11 | 2A0017-8 | Ball (1/4" Steel) | 4 |
| 12 | 2A0076-416 | Capscrew | 4 |
| Reference Number | Part Number | Description | Quantity |
|---|---|---|---|
| Reference Number | Part Number | Description | Quantity |
| 1V0294 | Detent Conversion Kit (Kit contains 1-6) | 1 | |
| 1 | 1V0269 | Detent Sleeve | 1 |
| 2 | 1V0272 | Detent Retainer | 1 |
| 3 | 1A0710 | Retainer Plate | 1 |
| 4 | 1A0739 | Detent Spring | 2 |
| 5 | 2A0017-8 | Ball (1/4" Steel) | 4 |
| 6 | 2A0736-104P | Lock Washer | 1 |
| Reference Number | Part Number | Description | Quantity |
|---|---|---|---|
| Reference Number | Part Number | Description | Quantity |
| 1 | 1V0082 | Stop Collar | 1 |
| 2 | 1A9008 | Spring | 1 |
| Reference Number | Part Number | Description | Quantity |
|---|---|---|---|
| Reference Number | Part Number | Description | Quantity |
| 1 | 1V2020M | Spool Spacer | 1 |
| 2 | 1V2021 | Special End Cap | 1 |
| 3 | 2A0078-410 | Capscrew | 4 |
| 4 | 1A9008 | Spring | 1 |
| Reference Number | Part Number | Description | Quantity |
|---|---|---|---|
| Reference Number | Part Number | Description | Quantity |
| 1 | 1V0067 | 2-Position Detent Sleeve | 1 |
| 2 | 1V0070 | 1-Position Detent Sleeve, “IN” (Optional) | 1 |
| 3 | 1V0071 | 1-Position Detent Sleeve, “OUT” (Optional) | 1 |
| 4 | 1V0217 | Detent Plug | 1 |
| 5 | 1V0264 | Detent Housing Assembly | 1 |
| 6 | 1A0610 | Detent Spring | 1 |
| 7 | 2A0017-8 | Ball (1/4" Steel) | 1 |
| 8 | 2A0079-414N | Capscrew | 1 |
| 9 | 2A0079-416 | Capscrew | 4 |
| — | 1V0557 | Detent Kit (2 Position) | 1 |
| — | 1V0558 | Detent Kit (1 Position “IN”) | 1 |
| — | 1V0559 | Detent Kit (1 Position “OUT”) | 1 |
| Reference Number | Part Number | Description | Quantity | |
|---|---|---|---|---|
| Reference Number | Part Number | Description | Quantity | |
| 1 | 1V0067 | 2-Position Detent Sleeve | 1 | |
| ✱ | 2 | 1V0068 | Pressure Detent Piston | 1 |
| ✱ | 3 | 1V0069 | Adjustment Screw | 1 |
| 4 | 1V0070 | 1-Position Detent Sleeve “IN” (Optional) | 1 | |
| 5 | 1V0071 | 1-Position Detent Sleeve “OUT” (Optional) | 1 | |
| ✱ | 6 | 1V0072 | Piston Stop | 1 |
| ✱ | 7 | 1V0264 | Detent Housing Assembly | 1 |
| ✱ | 8 | 1A0569 | Nut | 1 |
| ✱ | 9 | 1A0570 | Acorn Nut | 1 |
| ✱ | 10 | 1A0610 | Detent Spring | 1 |
| ✱ | 11 | 2A0012-008 | Upper O-Ring Back-Up | 1 |
| ✱ | 12 | 2A0012-007 | Lower O-Ring Back-Up | 1 |
| ✱ | 13 | 2A0017-8 | Ball (1/4" Steel) | 1 |
| 14 | 2A0079-414N | Capscrew | 1 | |
| 15 | 2A0079-416 | Capscrew | 4 | |
| ✱ | 16 | 2A0283-7007 | Lower Piston O-Ring | 1 |
| ✱ | 17 | 2A0283-7008 | Upper Piston O-Ring | 1 |
| ✱ | 18 | 2A0283-9017 | Housing O-Ring | 1 |